Lesson 7: Hollow Construction

-->

Lesson 7: Hollow Construction

• Form and solder inside ring (hard)                                        
• Solder inside ring to bottom plate (hard)
• Form and solder outside ring  (hard)                                     
• Solder outside ring to bottom plate (medium)
• Drill a hole through bottom plate and cut out inside the inner ring. Cut away excess from around the outside ring.
• Drill air hole. This can be placed wherever you want- on the inside ring if you don’t want it to be seen. You can also make a pattern of holes, or pierce out a pattern for your air hole. It can be a part of your design!
• Solder both inside and outside rings to top plate. This closes off the form. (medium)
• Cut away excess from around the outside ring. Drill a hole through top plate and cut out inside the inner ring.
• File, sand, and finish the form.