Project 2

-->

Project 2: Hollow Constructed Ring

Create and finish a hollow constructed ring! For inspiration, look at symbols and architecture/architectural elements. The ring does not have to be closed all the way. You can pierce designs into the sides. As hollow forms tend to be a bit bulky, also think about how you could wear the piece as a pendant.

Think about interesting outside (and inside) shapes! You do not have to make the walls (rings) the same thickness; you can slant them to taper the piece.

Designs: 10 sketches of rings- draw top view and side view to scale! Elaborate on surface designs on the ring, and placement of air holes.

Make maquettes of your favorite 3 designs. Maquettes can be made from card stock or stiff paper. Make maquettes to scale. You should be able to put the maquette on your finger!

Designs and 3 initial maquettes are due October 7.

Final Maquette is due beginning of class October 14.

Finished project is due beginning of class November 11.